2
Connects2
Vision
www.c2vision-eu.com
• Camera with cable to mini Male 4-pin connector
• 20cm mini Female 4-pin connector to Male 4-pin waterproof screw
connector cable with ‘TV system’ switcher.
• 10m Female 4 pin waterproof screw connector to Male Video RCA plus 12V+
& Ground wire connections for power
• Instructions
CONTENTS
INSTALLATION
1. Remove the relevant brake light housing from the vehicle and carefully
remove the bulbs/bulb holder assembly.
2. Insert the bulbs/bulb holder assembly into the camera and refit to the vehicle
taking care not to trap any cables.
3. Connect the 4-pin camera cable to the camera connection cable.
4. Decide whether the camera will display either PAL or NTSC
(the camera will
defaulted to ‘PAL’ configuration).
5. Connect the camera connection cables waterproof screw to the display
monitor using the extension - Male Video RCA, 12V+ and Ground wire
connections - and ensure that the image is displayed correctly.
Subscribe to our YouTube Channel for installation
guides and tips...
www.youtube.com/connects2
Located on the 20cm cable you will notice a green wiring loop. This loop is
what determines the camera’s ‘TV system’ output. From factory, this will default
to ‘PAL’.
When no connection between posts is made = PAL
When a connection between posts is made = NTSC
Please note: power to the camera needs to be disconnected in order for TV
system switch to take place.
PAL/NTSC SWITCHING
PAL
NTSC
