Connects2 CAM-LR1-AD Manual Download Page 2

Page: 2 / 8

www.connects2.com

ABOUT THIS PRODUCT...

CAM-LR1-AD

Reverse Camera Add On Interface with Video In Motion. For Land Rover 2010 -

2011 vehicles with touch screen navigation systems. Add on Camera interface

designed to allow the addition of an aftermarket reverse camera to the OEM

screen - compatible with NTSC cameras only.

Prior to Installation

Read the manual prior to installation. Technical knowledge is necessary for installa-

tion. The place of installation must be free of moisture and away from heat sources.

Please ensure you use the correct tools to avoid damage to the vehicle or product.

Connects2 can not be held responsible for the installation of this product.

Technical Support

Connects2 want to provide a fast and suitable resolution should you encounter any

technical issues. With this in mind, when contacting Connects2, try to provide as

much Information as possible. This will speed up the process and help us to help you.

Please use our dedicated online technical support centre: support.connects2.com

Subscribe to our YouTube Channel for installation

guides and tips...

www.youtube.com/connects2

Summary of Contents for CAM-LR1-AD








