2
Connects2
Vision
www.c2vision-eu.com
CONTENTS
• Replacement high level third brake light camera with fixed cable to 4 pin
connector
• 10m cable with 4 pin to RCA connector plus DC Power
• Instructions
INSTALLATION
1. Remove and disconnect the factory fitted third brake light from the vehicle.
2. Connect the brake light factory plug to the CAM-FT3 and check for correct
function of the third brake light.
3. Connect the Black wire to a suitable ground and connect the Red wire to
the reversing light circuit or an interface which provides a reverse signal.
4. Connect the camera to the 4pin extension cable and connect the extension
cable to the display screen via the Yellow RCA connector.
5. Test and ensure that the image is displayed correctly on the monitor.
6. Finally, fit the camera/brake light assembly into the aperture left by the
removal of the factory brake light.
Subscribe to our YouTube Channel for installation
guides and tips...
www.youtube.com/connects2
