Fast Ethernet LAN card – CR-CNL-FAST-R – Installation guide
3
3. Software installation
Please take the following steps for driver installation. Please note that the drive “E:\” represents your
CD-Rom drive.
Microsoft Windows 95/Windows 98/Windows ME
1.
Turn off the computer.
2.
Insert the adapter into the available PCI slot.
3.
Restart the computer.
4.
After Microsoft Windows reboot, the PCI Ethernet Controller will be found.
5.
The system will prompt for driver installation.
6.
Insert the “Driver and Utilities” CD into CD-ROM drive and press <Enter>.
7.
For Windows 95, Key in E:\ path to install driver for the adapter.
8.
For Windows 98, Key in E:\w98_2000 path to install driver for the adapter.
9.
For Windows ME, Key in E:\winme path to install driver for the adapter.
10.
The Windows system will install the driver automatically.
11.
Reboot the Windows system.
Windows NT 4.0
1.
Turn off the computer.
2.
Insert the adapter into the available PCI slot.
3.
Restart the computer.
4.
Click “Start” menu bar and select “Setting” item then “Control Panel” setting.
5.
Select “Network” icon.
6.
If this is the first time to install network on the machine then the system will ask “YES” or “NO” to
install network adapter. Please select “YES”.
7.
If the computer already install network before then you need to select “Interface” -> “Add”
8.
The system will prompt for driver installation.
9.
Insert the Driver CD into CD-ROM drive and press <Enter>.
10.
Key in E:\winnt path to install driver for the adapter
11.
The Windows system will install the driver automatically.
12.
Reboot the Windows system.
Microsoft Windows 2000
1.
Turn off the computer.
2.
Insert the adapter into the available PCI slot.
3.
Restart the computer.
4.
After Microsoft Windows reboot, the 10/100Mbps Fast Ethernet Adapter will be found and the
system will assign the default network driver to the adapter.
5.
Select “Control Panel” from “Start” menu bar
6.
Select “Network and Dial-Up Connection” folder then click “Local Area Connection” and
“Properties”.
7.
Click “Configure” item and select “Driver”
8.
From the “Driver” item then choose “Update Driver”
9.
The system will prompt two optional for driver search, one is auto search and the other is “Display
a list of known drivers ….”. Please select second one “Display …”.
10.
The system will prompt for driver installation and please select “Have Disk” button.
11.
Key in E:\w98_2000 path to install driver for the adapter
