Assembly Instructions
Tier: Completing the Configuration
Components & Fixing Kit
The extra M6x40 furniture bolts not used for building the modules will now be used to connect the modules
together.
All modules will be built before attaching. Screw positions on modules are in the positions indicated.
1.
Position M6x40 furniture bolts through one side of module and face adjacent module. Push both modules
together and securely tighten.
2.
Screw between the bottom metal under-frames from one module into the adjacent to finalise.
1
2
Return to the following pages for back balustrade
assembly:
Page 2 for Tier Steps modules balustrade assembly.
Page 4 for Tier Angled modules balustrade assembly.
Page for Tier Straight modules balustrade assembly.
Attaching the side balustrades:
Once all modules are
in place, side balustrades will need to be added to
cover any openings. In total there will be 4 parts:
• Top side balustrade x 2
• Bottom side balustrade x 2
Whether attached side balustrades to steps, angled
or straight module, all fixing points are the same.
Assembly shown on Steps module.
