Connection Platforms Assembly Instructions Manual Download Page 4

Page: 4 / 6

Assembly Instructions

Platforms Assembly

Connecting the modules

Platform modules are attached together via the slotted holes in the side of each end panel with a M8 x

50 bolt, washer and thumb turn wheel

Align the two modules and place a M8 x 50 bolt and washer through the front slotted holes on the lower

tier, attaching the thumb turn wheels and tightening

Repeat this process for the higher units

Summary of Contents for Platforms

Page 1: ...Platforms Assembly Instructions connection uk com ...

Page 3: ...xing kit 6 Push a long M8 bolt through the hole in the lower tier into the slot in the higher tier and attach a thumb turn wheel until tight 7 Repeat for all three fixing points 8 Finally replace the higher tier upholstery panel by aligning all button fix connectors and pushing down until all connectors are engaged ...

Page 4: ...her via the slotted holes in the side of each end panel with a M8 x 50 bolt washer and thumb turn wheel 2 Align the two modules and place a M8 x 50 bolt and washer through the front slotted holes on the lower tier attaching the thumb turn wheels and tightening 3 Repeat this process for the higher units ...

Page 5: ...fting directly above the corresponding module and dropping down vertically 2 Once positioned correctly push down firmly until the button fix connectors click into place Ensure all button fix connectors are aligned before pressing down firmly Your Platforms assembly is now complete Platforms Assembly ...