manualshive.com logo in svg

Connected IO EM1000T-NA-CAT1, User Manual, Page: 17 / 26

Share
Download
Connected IO EM1000T-NA-CAT1 User Manual Download Page 17

                    Connected IO Inc. CONFIDENTIAL 

 

EMU CAT1 Modem User Manual           Revision: V.05 

 

 

 

 

 

 

 

P a g e

 | 

17

 

 

 

 

6.

 

System Configuration – Linux- 

6.1       Preliminary Check  

First, the OS should detect the connected module as an NCM device. To force this check, create a file 
named 

cdc_ncm.conf

 in the folder 

/etc/modprobe.d/ 

and insert the following line.  

 
  
options cdc_ncm prefer_mbim=N  
  
  
Assuming the module is using the default #PORTCFG=0 configuration and #USBCFG=0 mode.   
 
 Reboot the Ubuntu-PC, and plug the USB cable in. Use the 

dmesg

 command to check if the module is 

recognized as a NCM device. The command response should contain something that looks like the 
following:  
 
dmesg<enter>  
.  
.  
[  510.764017] usb 1-3: new high-speed USB device number 7 using ehci-pci 
[  515.907764] usb 1-3: New USB device found, idVendor=1bc7, idProduct=0036 
[  515.907769] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 
[  515.907772] usb 1-3: Product: FIH7160 
[  515.907775] usb 1-3: Manufacturer: Telit.  
[  515.907777] usb 1-3: SerialNumber: 351622079900102  
[  515.946172] cdc_acm 1-3:1.0: This device cannot do calls on its own. It is not a modem.  
[  515.946240] cdc_acm 1-3:1.0: ttyACM0: USB ACM device  
[  515.947784] cdc_acm 1-3:1.2: This device cannot do calls on its own. It is not a modem.  
[  515.947845] cdc_acm 1-3:1.2: ttyACM1: USB ACM device  
[  515.949159] cdc_acm 1-3:1.4: This device cannot do calls on its own. It is not a modem.  
[  515.949224] cdc_acm 1-3:1.4: ttyACM2: USB ACM device  
[  515.950912] cdc_acm 1-3:1.6: This device cannot do calls on its own. It is not a modem.  
[  515.950979] cdc_acm 1-3:1.6: ttyACM3: USB ACM device  
[  515.952409] cdc_acm 1-3:1.8: This device cannot do calls on its own. It is not a modem.  
[  515.952480] cdc_acm 1-3:1.8: ttyACM4: USB ACM device  
[  515.954035] cdc_acm 1-3:1.10: This device cannot do calls on its own. It is not a modem.  
[  515.954103] cdc_acm 1-3:1.10: ttyACM5: USB ACM device 
[  515.960140] cdc_ncm 1-3:1.12: MAC-Address: 00:00:11:12:13:14  
[  515.960144] cdc_ncm 1-3:1.12: setting rx_max = 16384  
[  515.960782] cdc_ncm 1-3:1.12 usb0: register 'cdc_ncm' at usb-0000:00:1a.7-3, CDC NCM, 00:00:11:12:13:14 
  
 

 

The command response shows that Ubuntu, when connected to the module, maps automatically 
ttyACMx into USBx as summarized in Table 2 below.  
  
 

Summary of Contents for EM1000T-NA-CAT1



























Reviews:

No comments