MFC INSTALLATION MANUAL
Page
22 of 22
CONNECT
2
CAR.COM
5.3.3
Heater and Climate controls:
These accessories can be accessed easily from their respective outputs on the
key cylinder.
5.3.4
Power windows/Sunroof:
You can wire up the windows to roll up and down with just the MFC. Window
control should be done through a standalone window roll/up down module, or
standalone sunroof control module. The MFC can trigger these modules into
activation for the window controllers. Some cars already come with a factory
window control system. E.g. most cars that control the windows when the
driver turns the key in the door hole for a few seconds etc, can piggy back on
the factory window controller, by just sending a longer pulse to the door lock
line.
You can also control windows directly by using Relays(internal or external) to
control window motors, however, it is not recommended, as the MFC does not
have a safety voltage monitor to monitor motor current overload when the
windows are completely rolled up. One would have to implement an external
cutoff (even if the MFC is timed for the average rollup/roll down time). It is
recommended you just use a standalone window module controller.
5.3.5
Trunk release:
If your vehicle has a power hatch/trunk release you can control it with your
MFC by just triggering the trunk release line (either negative or positive
triggered).
5.3.6
Air Ride or Hydraulic Suspension:
The MFC is a perfect replacement for those large switch panels. With
Bluetooth, you will be able to stand outside the vehicle and control the whole
air ride or hydraulic set up.
5.4
THE SKY IS THE LIMIT:
There is no limit of what you can control and with the Connect2Car Software on your
Bluetooth® enabled cell phone or Bluetooth® enabled PDA all the outputs are fully
programmable to use them whatever way you want. This unlimited customization
should be done by a professional ONLY.
You can always work with preset packages that work to do specifically what you
want. Visit
www.connect2car.com
to download specific configuration packages geared
towards different unique configurations. Also, consult your local Connect2Car dealer
or Installer for more details.