
Transa PRO
‧
TransaView Console
7
5.
Remove both of the rear brackets and slide the
console drawer out half way to balance its weight.
Now, the front brackets hold the console drawer.
6.
Attach the extensions (from the
Rear bracket & extension kit
) to both sides of the KVM switch module.
Please note the length of the extensions and mount them in one of the following ways. For a 2U
module, the extensions are mounted to the lower half of the module.
Short extensions attachment Long extensions attachment
7.
The rear brackets, extensions and slide rails have tightly fit. Make sure you follow these steps
for easy installation.
A.
Slide the rear brackets onto the extensions.
B.
Then, insert both sliding rails
of the console drawer into the tight space formed by the rear brackets and the extensions.
The KVM
switch module should be pushed in
EVENLY
on both of right and left sides by both of your two
hands.
The wider side of plastic
extension is on the upper.
Summary of Contents for Transa PRO 15
Page 1: ......