9
-----------------
Operation
OSD (On-Screen-Display) Operation
Front Panel
On-line LED & Selected LED
When the LED turns green, the connected computer is powered-on.
When a computer is selected, its corresponding red LED illuminates.
Push-buttons
Each computer has a button associated with it on the front panel for
selection.
K/M RESET
K/M RESET
solves most problems developed by keyboard, mouse,
device replacement or change of configuration. Press down both the
front-panel number
1
and
2
push buttons for 2 seconds to re-configure
the whole system without turning either the USB KVM switch or any
computer off.
AUTO SCAN
Auto Scan
automatically scans through computers one by one in a fixed
interval (see
Scan Time
below). To initiate
Auto Scan
ning for
USB-8
and
USB-16
, press
7
and
8.
Figure 6: OSD screen illustration
By hitting the
left
Ctrl
key twice within two seconds, you may see the
'
Hotkey Menu
' if it is enabled (an OSD option). Or, by hitting the
left
Ctrl
key three times within two seconds, you will see a '
KVM MENU
'
screen showing a list of the computers with corresponding port
numbers, names and status, see Figure 6.
The port number of the currently selected computer is displayed in red,
same as the front indicator, at the right corner of the OSD menu.
8