TrailBlazer/SBC
Users Guide
Document: CTIM-00432
Revision: 0.04
Page 13 of 33
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2018-01-05
Detailed Feature Description
In Qseven systems, the processor and chipset are implemented on the Qseven CPU module. This connects to
the Qseven carrier via a MXM connector. Many of the existing Qseven Gen 1.0 modules use the Intel®
Atom™ mobile architecture, Z series processor SCH US15W chipset. The Qseven Gen 2.0 modules are
focused on the Intel® Atom™ E3800 architecture (Previously called Bay Trail).
For a list of Qseven module vendors, visit http://www.qseven-standard.org/
CPU & Chipset
Qseven Gen 2.0 Module
The processor and chipset are implemented on the Qseven Module. This is connected to the carrier via a
Foxconn MXM Card Edge Connector.
Function
Qseven Gen 2.0 Connector
Location
P9
Type
Foxconn 230 Position MXM Card Edge Connector
P/N
AS0B326-S78N-7F
Pinout
Refer to Qseven Revision 2.0 Specification (Pg. 25-27)
Qseven Fan
If provided, the Qseven CPU Fan can be powered from the TrailBlazer/SBC. Jumper J5 is used to select the
power (+VCC) that the fan will operate at.
Function
Qseven Fan Power
Location
P15
Type
Molex Solid Header with Friction Lock
P/N
22232031
Mating
22012035 (Or Equivalent)
Pinout
Pin
Description
1
TACH
2
+VCC
3
GND
Jumper – Qseven FAN Power [J5]
Function
Qseven FAN Power
Location
J5
Pinout
Position
Description
Left
Qseven FAN Power +5V
Right
Qseven FAN Power +3.3V
