manualshive.com logo in svg

Connect Tech Intellicon-NT960/PCI, User Manual, Page: 83 / 88

Share
Download
Connect Tech Intellicon-NT960/PCI User Manual Download Page 83

 

 

Chapter 4: Appendix G - Factory Settings 

4-31 

 

Intellicon-NT960/PCI User's Manual, ver. 0.02 

ACM/16, ACM/Flex16, ACM/16RJ Modules

 

The NT960/PCI ACM/16, ACM/16RJ and ACM/Flex16 modules 
ship with factory settings for the following: 

 

„

  ACM/16 ACM/16RJ, or ACM/Flex16 address 

„

 

ACM/Flex16: RS-485 SLIM options 

 

ACM/16, ACM/Flex16, ACM/16RJ Address Setting 

The ACM/16, ACM/Flex16 or ACM/16RJ address switch block 
or switch assigns a number for each port on that particular 
ACM/16, ACM/Flex16 or ACM/16RJ.  Connect Tech ships the 
ACM/16, ACM/Flex16 and ACM/16RJ with the address switch 
block or switch set for address 1.  This setting assigns port 
numbers 1 through 16 to the serial ports on the ACM/16, 
ACM/Flex16 or ACM/16RJ module.  

Figure 26

 shows the 

location and factory setting of the ACM/16 and ACM/Flex16 
address switch block.  

Figure 27

 shows the location and factory 

setting of the ACM/16RJ address switch. 
 

Summary of Contents for Intellicon-NT960/PCI

























































































Reviews:

No comments