Connect Tech DFlex-4/104, User Manual

Page: 29 / 82

Chapter 2: Hardware Installation 2-5
DFlex-4/104 User's Manual, ver. 0.04
Table 2: Port address settings
DIP switch Ports
1 2 3 1 2 3 4 Status
off off off 2F8 3F8 340 348 350
off off on 300 308 310 318 320
off on off 280 288 290 298 2A0
off on on 240 248 250 258 260
on off off 200 208 210 218 220
on off on 190 198 1A0 1A8 1B0
on on off 140 148 150 158 160
on on on 100 108 110 118 120
Note: Port addresses are expressed in hex
Examples :
1.
The following example shows the port address jumper block
set for the factory setting of port addreses 200, 208, 210, 218
(hex) and status port disabled
Port address
switch block
4 5
SW
1
ON
1 2 3 6
Port address
switches
Status Port
switch
2.
The following example shows the port address jumper block
set for port addreses 2F8, 3F8, 340, 348 (hex) and status
port disabled.
Port address
switch block
4 5
SW
1
ON
1 2 3 6
Port address
switches
Status Port
switch
3.
The following example shows the port address jumper block
set for port addreses 240, 248, 250, 258 (hex) and status port
260 (hex) enabled.
Port address
switch block
4 5
SW
1
ON
1 2 3 6
Port address
switches
Status Port
switch