Photon AI Camera Platform
Users Guide
Document: CTIM-00080
Revision: 0.06
Page 16 of 29
Date: 2021-08-20
GBE RJ45 Ethernet & PoE PD Connector
The NVIDIA Jetson NX modules will allow internet communication via the RJ-45 ethernet connector. GbE
connector supports 10Mbps/ 100Mbps/ 1000Mbps.
The Photon AI Camera Platform can support Power over Ethernet delivery through this connector. As in
all Power Over Ethernet implementations, the Photon AI Camera Platform includes power isolation
transformers; therefore, it has an isolated ground from the power sourcing equipment. The Photon AI
Camera Platform PoE PD version is typically used for remote installations where the only outside
connectivity is the PoE PD connection itself.
Function
Description
Location
P7
Type
Pulse Electronics RJ-45
Ethernet Connector
Carrier Connector Part Number: JXK0-0190NL
Manufacturer: Pulse Electronics
Mating Connector Ethernet (Cat5, Cat5e, Cat6, etc.)
Cable
Pinout
Refer to Ethernet Standard
Note 1:
PoE PD 802.3af / 802.3at supported on PoE PD version of the Photon AI Camera platform (CTI PN: NGX002)
Note 2:
PoE PD is
not
supported on lower cost non-PoE PD of the Photon AI Camera platform (CTI PN: NGX003)
WARNING:
If the Photon AI Camera Platform PoE PD version is powered over PoE in a lab setting or field
service scenario, extreme care must be used when connecting externally powered equipment to P6
(USB), P9 (GPIO), P13 (USB) and P12 (HDMI) to avoid creating ground currents from differences in
potential. Please refer to the following section for more information on connectivity.
