COM Express Type 10 PC Connector Carrier Manual
Users Guide
Document: CTIM-00489
Revision: 0.01
Page 28 of 38
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2019-07-04
Typical Hardware Installation Procedure
1.
Ensure all external system power supplies are off.
2.
Install the COM Express module. Be sure to follow the manufacturer’s direction for proper
heatsink/heatspreader installation and any other cooling instructions from the manufacturer.
3.
Install the necessary cables for the application. At a minimum, this would include:
a)
Power cable to the input power connector
b)
Connect a video display cable
c)
Keyboard and mouse via USB
d)
mSATA Hard Drive or bootable USB
4.
Connect the power cable to power supply
5.
Ensure your power supply is in the range of +8V to +14V DC
6.
Switch on the power supply
On-board Indicator LED
The COM Express Type 10 PC Connector Carrier has 1 on-board indicator LED.
LED
Description
D9
Power Good
– Indicates carrier powers supplies are operating properly
See below for a diagram of where the LED is located.
