Connect Tech BBG001 User Manual Download Page 30 | Manualshive

Page: 30 / 37

Connect Tech BBG001 User Manual Download Page 30

Connect Tech BlueStorm/Express User Manual

Revision 0.15

30

Hardware Installation

Installing the BlueStorm/Express into Your System

Turn off the power to your computer and open it to expose the expansion slots (consult your
system’s documentation for more information on this procedure).

Jumper all of the ports to the desired line interface and termination.

Choose an available PCI Express position and gently press the card into the slot.

Software Installation

Connect Tech provides drivers for the following operating systems:

•

Linux 2.4+

•

Windows 2000 / XP / Vista / 7 / 8.X / 10

•

Windows Server 2003 / Server2008

•

Windows CE / XPe / Embedded 7

•

QNX 4.X / 6.X / 7.X

•

Solaris 10

•

SCO Unix/Openserver

Please refer to the readme.txt files found in the driver package.  These files contain technical tips or release
notes concerning installation and configuration of the device driver.

If you are interested in a device driver for an operating system not listed please contact the Connect Tech
Sales Department.  Also, visit the Connect Tech website for the latest product manuals, installation guides
and device driver software downloads.
http://connecttech.com/product/pci-express-bluestorm-express/

«
...
28
29
30
31
32
...
»

Summary of Contents for BBG001






































Reviews:

No comments