Connect Systems CS4000, User Manual

Page: 20 / 22

20
B. Press / button until “RPTRTALK”.
C. Press button for selection.
D. Press / button until “REPEATE” or “TALKRND”.
E. Press button for confirmation.
Switch the talkaround or repeater mode through “talkaround”.
Miscellaneous Items
The miscellaneous items can help you customize some setups of the radio.
The operating steps go as follows:
A.
Press the “Menu Selection/Enter” button to enter the menu mode.
B. Press / button until “UTILITY”.
C. Press button for selection.
D. Press / button until the items you require are showed.
E. Press button for confirmation. The radio will show the current setup.
F. Press / button to show all items that can be set with this item.
G. Press button to select this setup.
H. Press button to return to the previous operation.
Change the setup items in the following table as per the previous steps.
Items Selectable Setups Functions
Squelch Level
"SQL LEV " SQL 0 ~ 9 Change the squelch level of the radio.
Transmission Power
"PWR LEV " "PWR LOW "
"PWR MID ",
"PWR HI "
Select transmission power among high,
medium and low levels.
VOX Level
"VOX LEV " VOX 0 ~ 9 Change the VOX level of the radio.
Backlight
"BACK LED" “BLED OFF"
"BLED ON "
"BL AUTO " Select among such modes of backlight as
“turnoff”, “normal turn-on” or “auto”.
MCU software version
display
"SOFT VER" ……
Eg
．
“R01.00”
Show the software version.
Scan
In order to receive the calls from many channels, the radio can be programmed to scan
these channels. At most there are 16 channels in each scan list. Each channel can use a
scan list together with others or alone.
Start/Close Scan Function
You can press “SCAN” button directly from the menu to activate the scan function.
When the scan function is started, icon and your channel will display at the same time.
In the scan state, the red indicator will flicker. When the scan is stopped, the indicator
will stop flickering. During the period from the scan state the menu mode, the radio will
stop scanning. After the menu is quitted, the scanning will go on.
Enter the scan state through menu mode