II-EVB-630W User Manual
Getting
Started
2.10.2 Fixed
IP
Configuration
To configure the II-EVB-630W to work with a fixed IP address, the following
parameters must be configured:
1
Use the Quick Configuration screen to set the following parameters:
•
IP Address (DIP): Set it to the IP address you want the II-EVB-630W to
have.
•
Subnet (SNET)
•
IP Gateway (IPG)
2
Click Save and recycle power to the II-EVB-630W.
These settings can also all be configured using the AT+i commands - AT+iDIP,
AT+iSNET and AT+iIPG. Full details about these commands can be found in the
AT+i Programmer's Manual.
2.11
Testing the Connection
The connection can be tested using any operation that causes the II-EVB-630W to
send/receive information. For example, sending and receiving data over a socket,
sending emails, or opening an FTP session.
One of the simplest ways to test the connection is using the web client, as it requires
no additional configuration. Assuming the LAN is connected to the Internet, you can
use the client on the iChipConfig Utility to run the following test:
1
From the Main menu, select the Get URL option.
The iChip Configuration Tools window is displayed:
Getting Started
21
