Connect-A-Port XL6 Fixed Dock
Instructions for:
Connect-A-Port XL6 Front or Side Mounting
Step 3
You will need a pipe long enough to
drive into the ground. If you have a
very secure fixed dock you can
mount the pipe to the dock, but if the
dock is not of the best integrity
mounting to the dock is not
recommended because it can work
the dock loose in a high wake area.
It is recommended that you drive the
pipe in the ground and mount it to a
fixed dock if applicable. Note: pipe
size 2” sch 40 pipe or max dia of
2.375”. (50 Dn mm sch 40).
Tools Needed
9/16” Wrench
Pole Pounder
1
2
Step 1
Slip the XL6 Pole Connectors into each
of the connector slots.
Step 2
Secure each connector with bolt,
diamond washer and spacer. Tighten all
bolts using 25 lbs/ft (3.46 kg/m) of
torque.
1/21/21
Please note that placing a port in an
unsuitable location may void any warranty
provided by Connect-A-Dock. Please contact
PWC Port or your local distributor or dealer if
you have any questions regarding the
suitability of your particular dock location.
Installation
All specifications provided by PWC Port are based upon PWC Port test data and are provided without representation or warranty. Actual
specifications, weights and dimensions may vary for a variety of reasons, including, without limitation, due to the rotational molding process.
Specifications should be regarded as nominal values only and not as binding actual values. Please contact PWC Port if you have specific
questions regarding the specifications of any PWC Port product.
PWC Port Product Installation and Use Warning Disclaimer
Repairs of a PWC Port should only be performed
by an authorized PWC Port technician. If repair
is performed by unauthorized persons, serious personal
injury and/or property damage could occur.
If unauthorized personnel repair a PWC Port,
PWC Port hereby disclaims any and all
warranties, expressed or implied. PWC Port
limits its warranty to PWC Port's published
PWC Port warranty furnished with each product.
No other warranty of any kind either verbal or implied
including warranties of merchantability and fitness for
a particular purpose are recognized.
The contents of this manual are subject to change
without notice and should not be construed as a
commitment, representation, warranty or guarantee
of any method, product or device by PWC Port.
Reproduction or translation of any part of this
manual, without the written permission of PWC Port,
is prohibited.
Any inquiries concerning the PWC Port published
warranty or this manual and its contents please
contact PWC Port.
For low maintenance cleaning use a stiff
broom or brush with a garden hose. A
pressure washer with no heat can also
be used. When using soap, use an
environmentally safe product.
Cleaning
Dock anchoring methods listed in this
instruction manual are only suggestions.
It is up to you to determine which
method suits your needs.
Anchoring
Part #S01106
connectadock.com | 1501 Owner Avenue, Atlantic, IA 50022 USA
