3
Configuration
On the configuration scheme you will find how to set up all parameters.
Example 1: Setup Bluetooth detection range
Within 10
seconds
○
●
○
●
●
●
○
●
●
●
●
○
●
●
○
To leave the programming phase, press
3 times.
Example 2: Setup Continuous Mode
This mode means that the reader sends out a Wiegand signal for every 5 seconds, as long as
you are in the detection range. Very useful for nearby detection, keeping the door open as
long you are in range.
Within 10
second
○
●
○
●
●
●
●
●
●
●
*
*
(toggle)
To leave the programming phase, press
3 times.
Note:
In the last step (the “1” button) the green LED is for ON and the red is for OFF.
Example 3: The Walk Test
This mode is for automatically setting the detection distance. (You can set up the distance by
help of your mobile phone (Bluetooth on). Walking to the distance you wantto be the detec
-
tion range, stay there in 10 seconds (green LED lights when OK and the reader goes back to
the
Distance
settings).
Within 10
seconds
○
●
○
●
●
●
●
●
●
*
*
*
(toggle)
Place your mobile phone near the reader and wait for the LED’s to light continuously:
●
○ ○ →
○
●
○ → ○ ○
●
→
●
○ ○
etc. Now walk to the desired distance within 10seconds, the reader’s yel
-
low LED will flash 7 times (
*
○ ○
) to read the distance and a steady green light (
○
●
○
) confirms
the settings and the green and red LED lights (
○
●
●
).
To leave the programming phase, press
3 times.
Note:
This mode is a very practical setting taking in to the account the condition in the
installation and the mobile phone you use.
#
Strøm til
(0 - 127)
55-58
3 / 4
2
#
6
#
#
Strøm til
1
3
#
6
#
#
Power on
1 / 2
2
#
6
#
