5.4 Changing the Service code
The Service code is used to configure the C1000LP’s settings.
To change the Service code, enter the following within 10 seconds after power on:
○
●
○
●
●
○
*
*
○
○
●
○
5.5 LED indications
The C1000LP’s 3 LED’s can be adjusted at will.
To adjust the LED indications enter the following:
adjust the LED’s for standby indication (normal).
adjust the LED’s for correct code indication (active).
adjust the keying indication (how the LED will react while keying).
To adjust the LED’s press on the following:
= yellow LED (toggle by press)
= green LED (toggle by press)
= red LED (toggle by press)
= buzzer (works only on active and keying indication (toggle by press))
= save and go one step back
To save the settings press
or press
to go back to the previous point
(not saving).
#
Key in the
Service code
#
Key in
01
#
Key in new code
#
Repeat new code
#
02
#
1
#
2
#
3
1
2
3
0
#
9
*
*
*
*
*
*
*
*
*
*
*
*
#
*
