Note: For more safety, please hang and install this product away from aisles, seating areas, or
areas within reach of people.
Before hanging the product, make sure that the installation point can bear the weight of the
product 10 times.
Product installation must have double protection devices, such as safety ropes.
When hanging, removing or repairing this product, it is forbidden to stand under the installation
point
本产品是专业特效复古灯。
假如产品在经过
较⼤的温度差后（例如，运输后），则不要⻢上启动产
品因为热涨冷缩会损坏到产品。请等到设备达到正常室温后再启动产品。
注意防震。产品安装过程中避免强烈碰撞。
选择安装地点时请确保产品未暴露在过热、太湿或多灰尘的地⽅。请尽量不要把任何电线置于
地
⾯，做好防⽔效果，否则可能会遭受电击的危险。
安装产品前，请确保安装点安全。
如需悬挂请将产品系上安全绳，并在安装时检查所有的螺丝是否正
确
请确保玻璃状态良好。当玻璃损坏或者划伤时，请更换玻璃。
建议由熟悉本产品的技术⼈员去操作本产品。禁⽌⾮技术⼈员操作此设备，因为许多损失就是
由
于⾮专业操作的结果。
请妥善保管包装材料以备需要进⾏⼆次运输。
如果没有⽣产商或者经销商的指导，请勿擅⾃更改产品。
未按照说明书规定操作使⽤此设备所引起的任何设备故障均不属于保修范围。⽽且由此所导致
的
任何由于短路、伤害、触电、紫外线导致的伤害、等均不在保修范围内。
4.
产品吊挂和安装
注意：为更安全起⻅，请在远离⾛道，座位区域，或者⼈⼿可及的区域吊挂安装本产
品。
吊挂本产品前，请确保安装点可承受终于本产品
10
倍的重量。
产品安装必须有⼆重保护装置，例如安全绳。
当挂，拆除或者维修本产品时，禁⽌站在安装点下
Features:
This product is a retro triangle LED special effect background light. The main light uses 16
30W 1800K golden yellow LED lamp beads, and the auxiliary light uses 576 0.3W RGB three-
in-one LED lamp beads. Each main light is surrounded by 36 pieces. The lamp beads are
divided into 16 modules and can be individually controlled, the effect is outstanding and vivid.
This luminaire can seamlessly splice multiple luminaires or hang them for use, which can bring
dazzling and multi-style effects to the stage.
This product has a good LED refresh rate, no flicker, and can be suitable for various
occasions.
The lamp can be set with the signal hold function, when the signal is disconnected from the
console, the current effect can be maintained
The appearance design is avant-garde, strong sense of balance, good stability effect,
generous and decent, and the overall internal structure is reasonable, simple and harmonious.
