Copyright
©
2020
congatec
AG
SMC1m10
45/50
4.17
Test Mode/Wireless-Disable Mode
On conga-SMC1, connector X59 provides the following functions:
•
force recovery (see section 4.16 “Force Recovery Switch”)
•
module-specific test function
•
wireless-disable mode
To activate any of these functions, connect the corresponding signal at pins 1, 3 or 5 to GND (pins 2 or 4).
Table 33 X59 Pinout Description
Pin Signal
Description
1
FORCE_RECOV#
Force recovery
2
GND
Ground
3
TEST#
Module-specific test function
4
GND
Ground
5
WDIS#
Wireless disable
Connector Type
X59: 5-pin, 1.25 mm pitch picoblade header (Molex 0532610571)
Possible Mating Connector: Molex 0510210500
4.18
CAN Bus Header
The conga-SMC1 provides two CAN buses—CAN 0 on connector X24 and CAN 1 on connector X25. The CAN buses do not have resistor termination.
For CAN bus termination, use a cable adapter with internal resistor termination.
Additionally, connector X38 may be used for powering CAN devices or auxiliary fan.
Table 34 X24/X25 Pinout Description
X24 - CAN 0
X25 - CAN 1
Pin Signal
Pin
Signal
1
CAN0_H
1
CAN1_H
2
CAN0_L
2
CAN1_L
3
GND
3
GND
X59
X24/X25
