Copyright
©
2018
congatec
AG
T6COm10.indd
40/45
7
Additional Features
7.1
Power Buttons
The conga-IT6/COMe provides one power button (M32) by default. Optionally, the conga-IT6/COMe can provide an additional power button
(M33). The optional LED D30 at the board edge is lit when the system is powered on.
7.2
Reset Buttons
The conga-IT6/COMe provides one rest button (M34). Optionally, the conga-IT6/COMe can provide an additional reset button (M35).The
COM Express™ module and all connected components will perform a hard reset when either button is pressed. The reset buttons are connected
to the COM Express™ module’s SYS_RESET# signal.
7.3
Beeper
The conga-IT6/COMe provides a beeper (M27). It provides audible error code (beep code) information during POST. The beeper is connected
to the COM Express™ module’s SPEAKER signal.
M33
M32
M34
M35
M27
