Copyright
©
2018
congatec
AG
T6COm10.indd
12/45
2
Connector Layout
The connector layout picture below shows
each connector and its name designator.
Jumpers and their respective pin 1 are also
shown. Select the Adobe ‘Zoom-In-Tool’
and zoom in on a given component to see
its designator. Hover over the component
and the ‘Zoom-In-Tool’ will change indicating
there is a link. Click on the link to navigate
to the area in the document where the
component is described. Use the mouse icon
in the top left hand corner of the destination
page to return to the connector layout picture.
