Copyright
©
2017
congatec
GmbH
PA50m112
16/48
2
Specification
2.1
Feature List
Table 6
Feature Summary
Form Factor
Based on Pico-ITX form factor (100 x 72 mm)
Processor
Intel
®
5
th
Generation Intel
®
Atom
®
, Pentium
®
and Celeron
®
SoC.
Memory
Up to 4 Channels onboard LPDDR4 with up to 2400 MT/s, maximum system capacity 8 GB
cBC
Multi-stage watchdog, manufacturing and board information, board statistics, I2C bus, Power loss control
Chipset
Integrated in the SoC
Audio
High Definition Audio Interface, Cirrus Logic CS4207
Ethernet
2x LAN Gbit / 100 Mbit / 10 Mbit, Intel
®
Gigabit Ethernet i211 controller (i210 for industrial variants)
Graphics
Intel
®
Gen 9 HD Graphics with support for DirectX12, OpenGL 4.3, OpenCL 1.2, OpenGLES 3.0, MPEG2 full HW acceleration with H.264 with L5.2
decode and encode, HEVC (H.265), VP8, VP9, PAVP 2.0, HDCP 1.4/2.0, MVC and supports up to 3x independent displays
Graphic Interfaces
1x DP++, 1x DP via USB Type-C™ and either 1x LVDS (default) or 1x eDP 1.3
Back Panel I/O
Connectors
1x DC Power Jack (optional for industrial variants)
2x USB 3.0 Ports
1x USB Type-C™ Port
1x DP++
2x Gigabit Ethernet Ports
Onboard I/O
Connectors
1x 2-Pin Power Connector
1x CR2032 / BR2330A Cell Battery Header
1x High Definition Audio Header
1x USB 2.0 Header (for two additional USB 2.0 ports)
1x SATA / SATADOM Port
1x 2-Pin SATA Power Connector
1x mSATA Card Slot
1x Backlight Power Header
2x UART Headers
1x mPCIe / mSATA Card Slot
1x Micro-SD Card Slot
1x CPU Fan Header
3x Feature Connectors
1x MIPI CSI-2 Connector
Other Features
Thermal and voltage monitoring, RTC Battery, congatec standard BIOS
BIOS
AMI Aptio
®
UEFI 5.x firmware, 8 MB SPI flash with congatec embedded BIOS features.
Power
Management
ACPI 4.0 compliant with battery support. Also supports Suspend to RAM (S3).
Ultra low standby power consumption.
Security
Integrated Intel
®
PTT (TPM 2.0). Infineon SLB9670 (SPI TPM 2.0).
Note
Some of the features mentioned in the above feature summary are optional. Check the article number of your module and compare it to the
options information list on page 13 of this user’s guide to determine what options are available on your particular module.