Confycare EL12, Quick Start Manual

Page: 10 / 16

EN
8
Dynamic Position
Adjusting the back section
Bolt Handle
● Step 2: Turn the black handle into the
unlock position & the back section can then
slide on the track.
Single leg training
● Step 1: Remove the leg upholstery section
from the frame
● Step 2: Take the single leg pad from under the
backrest & insert into the square tube to fix it in
place.
● Step 3: Turn the black handle to the unlock
position
● Before adjusting make sure the table is in a flat
position.
● When using the tilt function, make sure the Bolt
on the back section is on “LOCK”
Lift the back section:
Release the bolt then push the handle and adjust
the angle.
Lower the back section:
Push the handle down then lower the backrest
to the flat position and put the bolt back to the
hole.
Dynamic status
Double Leg Training:
● Step 1: Take out the leg section from the table
frame
Before training make sure to tighten the belts.
Press your foot up to the top of the foot plate,
then release your legs to slide on the track.
Adjusting the training stroke
Set the leg training stroke according to each
patient. This should always be set according
to patient strength.
Leg pad