Electrical connection
•
Any electrical work that is required to install this appli-
ance MUST be carried out by a qualified electrician.
•
Warning: THIS APPLIANC MUST BE EARTHED
Before making any electrical connections, ensure that:
• Electrical safety is only guaranteed when the earth system of
your house in accordance with the related local regulations.
• Do not bend, stretch or pull the supply cable to avoid electric
shock.
• Ensure the power socket is suitable for the Maximum power
of the machine (fuses in the power circuit must be 16 amp).
• The supply voltage should be the same as that indicated in
the technical specifications and the appliance rating plate.
• The appliance should be earthed and in compliance with the
applicable law.
• When installed, the power socket must be within easy reach.
• If the socket outlets in your home are not suitable for the
plug supplied with this unit check with a qualified electrician
for replacement.
• To avoid the risk of overloading your plug socket, the use of
adapters, multiple connectors or extension cables are not
recommended. The appliance must be connected to a 220-
240 volt 50Hz AC supply.
• Carefully remove all package materials including the foam
base, dispose of correctly.
Unpacking condenser dryer
Caution: 2 people are required to unpack the tumble dryer, it is
recommended that gloves are worn.
Carefully remove all packaging materials including the foam
base, dispose of correctly.
Installation
• Please install the dryer on solid and flat ground.
• Please do not place the dryer on the slope, soft carpet or
wooden floor.
• Please do not install the dryer outdoors, to prevent the dryer
from being frozen to damage of machine parts.
• If the floor is obviously uneven, it needs to be adjusted. It vi-
brates the machine, causing machine to move from its posi-
tion. Using tools to adjust the height of four machine legs to
adjust the levelness of this dryer.
(Fig1)
Fig1
39
38
GB
GB
