CONFORAMA Saba LFS814MI18W, Manual, Page: 23 / 34

2. Stop the holes with transport hole plugs.
3. Keep the transport bolts properly for future use.
Levelling the washing machine!
Warning!
• The lock nuts on all four feet must be screwed tightly
against the housing.
1. Check if the legs are closely attached to the cabinet. If not,
please turn them to their original positions tighten the nuts.
2. Loosen the lock nut turn the feet until it closely contacts with
the floor.
3. Adjust the legs and lock them with a spanner, make sure the
machine is steady.
Raise
Lower
Foot
Lock nut
1 2 3 4
Connect Water Supply Hose
Warning!
• To prevent leakage or water damage, follow the
instructions in this chapter!
• Do not kink, crush, modify or sever water inlet hose.
• For the model equips hot valve, connect it to hot water
tap with hot water supply hose. Energy consumption will
decrease automatically for some program.
Unpacking the washing machine
Warning!
• Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
• There is a risk of suffocation! Keep all packaging well away
from children.
1. Remove the cardboard box and styrofoam
packing.
2. Lift the washing machine and remove the base
packing.Make sure the small triangle foam is
removed with the bottom one together. If not,
lay the unit down with side surface then remove the small
foam from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain
hose.
4. Remove the inlet hose from the drum.
Remove transport bolts
Warning!
• You must remove the transport bolts from the backside
before using the product.
• You’ll need the transport bolts again if you move the
product, so make sure you keep them in a safe place.
Please take the following steps to remove the bolts:
1. Loosen 4 bolts with spanner and then remove
them.
4 3 4 2
GB GB