ENGLISH
ENGLISH
GB-11
GB-10
SETTING THE THERMOSTAT KNOB
The refrigerator is controlled with a thermostat
knob located inside the fridge, towards the upper
right-hand corner. (Turn the knob from the
STOP (0) position towards the higher numbers
for colder temperatures. The knob can be
adjusted from setting 1 to 7.)
Higher settings on the knob (higher numbers)
mean lower temperatures (colder) in all
compartments of the appliance.
Changes of the ambient temperature affect
temperature in the interior of the appliance
so choose a correct setting of the temperature
control knob, depending on your ambient
conditions.
In the STOP (0) position the appliance does not
operate (the cooling system is switched off), but
power supply is not interrupted.
Set the thermostat knob to a middle position to
achieve -18 oC in the freezer compartment.
Please Note:
If the appliance is switched off you must wait at
least 5 minutes before restarting the appliance
or re-inserting the plug into the wall outlet.
This is to allow the protection device in the
compressor to reset.
If the compressor fails to start correctly remove the
plug and wait for 5 minutes before you try again
then the compressor should restart normally.
The storage temperature may be affected by:
• The room temperature
• How often the door is opened
• How much food is stored
• Position of the appliance
When you set the correct temperature, all these
factors mentioned above shall be taken into
account.
TEMPERATURE INDICATE
In order to help you get the correct adjustment
of your device, it is equipped with a temperature
gauge placed in the coldest area.
For the proper storage of food in
your refrigerator and in particular
in the coldest area, make sure that
«OK» appears in the temperature
indicator.
Summary of Contents for FAR R5219S
Page 1: ...R5219W R5219S ...
