3.
Connect the aluminium tube to the control panel making sure that you insert the spring string
inside the aluminium tube (image 3).
4.
Take the cover model screw, remove the nut, washer and gasket from one end of the screw.
Insert the screw through the hole on the bottom of the control panel and the alumin
(image 4).
5.
Attach the gasket, washer and n
spanner provided (image 5).
6.
Connect the two ends of the spring string and check that the power is reaching the control panel
(image 6).
6
um tube to the control panel making sure that you insert the spring string
um tube (image 3).
screw, remove the nut, washer and gasket from one end of the screw.
the hole on the bottom of the control panel and the alumin
Attach the gasket, washer and nut onto the cover model screw and tighten using the
spanner provided (image 5).
Connect the two ends of the spring string and check that the power is reaching the control panel
um tube to the control panel making sure that you insert the spring string
screw, remove the nut, washer and gasket from one end of the screw.
the hole on the bottom of the control panel and the aluminium tube
tighten using the Hexagonal
Connect the two ends of the spring string and check that the power is reaching the control panel
