User documentation The Confetti Maker FX
Ⓡ
DMX Controller
The DMX Controller is used to control al TCM DMX Devices.
DMX Cable
Connect the Male side of the DMX Cable to the CO2 LED. Connect the Female side of the DMX Cable to the DMX
Controller.
Loop Through Cable
The function of the loop through cable is supplying multiple devices with a single power socket. Looping through
the device should only be done without power. The first CO2 LED is connected to a power socket with the power
socket to Powercon cable. The second CO2 LED is powered with the blue Powercon connector on the loop
through cable. The grey side of the loop through cable connects to the grey connector on the first CO2 LED.
Connect the Powercon by plugging the Powercon into the connector on the CO2 LED and turning it clockwise
until you hear a click sound. Repeat this process for the rest of the CO2 LEDs.
