background image

*Model 635-52X is a 
straight up-and-down 
ladder and should be 
installed 3” to 6” from 
the pool wall.

Note: 10 Lbs of
 

sand required

 

(See Step 2)

SAND

MODEL #635-52X

ALL PLASTIC INPOOL LADDER

Adjusts to fit pools 46” to 56”

Ladder must be attached to deck

WEIGHT LIMIT 250 LBS.

ASSEMBLY, INSTALLATION AND USE MANUAL

Assembly video available online: www.conferplastics.com

To reduce the risk of drowning, entrapment, falls, paralysis, electrocution, or 

other serious injury or death: 

Dealer/Installer:

 Give manual to homeowner.

Installer:

 Read 

"Safe Installation"

 on page # 2 and all instructions before beginning. For proper assembly and 

installation, instructions must be followed completely. 

Homeowner:

 Read 

"Safe Use"

 on back cover before using. Save these instructions.

Installation must comply with local codes and may require permits.

S

Proudly Made in U.S.A. by

Summary of Contents for 635-52X

Page 1: ...deo available online www conferplastics com To reduce the risk of drowning entrapment falls paralysis electrocution or other serious injury or death Dealer Installer Give manual to homeowner Installer Read Safe Installation on page 2 and all instructions before beginning For proper assembly and installation instructions must be followed completely Homeowner Read Safe Use on back cover before using...

Page 2: ... manufactured for a specific pool wall height and or deck of the pool check product specification and the height of your pool Check that you have all required parts Check the contents of the carton with the Parts List for this ladder All parts and hardware are required If any parts are missing DO NOT attempt to assemble or install the ladder Instead call Toll Free U S 800 635 3213 or visit our web...

Page 3: ...o the legs DO NOT secure with screws at this stage Step 9 Place the ladder into the pool and position mounting blocks on deck Slide the adjustable tubes up or down as needed until mounting blocks are sitting flush on the deck Ladder MUST rest on pool bottom If not EB100 riser s are required See page 3 to order Step 10 Drill four pilot holes 1 8 through holes in each block into wood surface Fasten ...

Page 4: ...RESS BELOW UPON REVIEW OF THE INFORMATION YOU WILL BE NOTIFIED IF PART IS COVERED UNDER THE WARRANTY AND THE SHIPPING HANDLING CHARGES This warranty gives you specific legal rights and you may also have other rights which may vary from state to state Confer Plastics Inc 97 Witmer Road North Tonawanda N Y 14120 2421 Safe Use To reduce the risk of drowning entrapment falls paralysis or other serious...

Reviews: