CX82320 ADSL USB Endpoint Windows Drivers User Guide
100430A
Conexant
2-1
REVIEW COPY- NOT RELEASED - 9/10/02 6:13 PM
2 Installation and Setup
2.1 Installation
2.1.1 Installing the ADSL USB Endpoint
The ADSL USB Reference Board can be connected to any available USB port connector
on the MACHINE. There are no option switches for the user to set. Once the board is
connected to the USB port and the driver software has been installed, connect the DSL
line input to the DSL RJ11 jack on the card. Some designs may have a second RJ11 for
connecting an ordinary telephone handset directly to the USB card.
2.1.2 Installing the Windows Driver
The ADSL USB Endpoint software can be installed when using the .inf files for
Windows plug-n-play.
The following examples are shown for a Windows 2000 operating system. Installations in
other Windows environments are similar.
2.1.2.1 INF Installation of the Windows Driver
1.
With the computer running at the desktop, connect the ADSL-USB Reference Board
to the USB cable connected to the computer. The Windows operating system will
detect the new hardware.
2.
When prompted with the
Found New Hardware Wizard
, select
Next
to continue.
