Conel UCR11 v2 SL, User Manual

Page: 16 / 32

ROUTER DESCRIPTION
5.7.1.
Status indication
About router status inform eight led indicators on the front panel and on every port are
two LED indicators, which inform about port status.
Label Color State Description
PWR Green
Blinking Router is ready
On Starting of the router
DAT Red Blinking Communication in progress
PPP Yellow
1x flash per
second
Signal strength is from –50 dBm to –69 dBm
2x flash per
second Signal strength is from –70 dBm to –89 dBm or difference
between neighbours cells is exactly 3 dBm
3x flash per
second Signal strength is from –90 dBm to –113 dBm or difference
between neighbours cells is smaller than 3 dBm
CDMA Yellow On CDMA active
OUT Green On Binary output active
IN Green On Binary input active
USR Yellow Function selected by user
UMTS Yellow On UMTS active
ETH
Green
On Selected 100 Mbit/s
Off Selected 10 Mbit/s
Yellow
On The network cable is connected
Blinking Data transmission
Off The network cable is not connected
PORT
Green In accordance with fitted port (see technical specification of expansion port)
Yellow In accordance with fitted port (see technical specification of expansion port)
Table 7: Router status indication
State indicate of PPP LED is updated every 10 seconds.
11