ConectaIP IPefono HQ, User Manual, Page: 32 / 79

26
5.3 Network configuration
The network is configured by first selecting the “
are as follows:
Network
Get network configuration from DHCP server
Local network addresses
Router IP address
Domain name server
Domain name
Telnet server port
Web server port
Domain Name Server port
Network Time Protocol port
Simple Network Management Protocol port
SNMP trap URL destination
SNMP trap port destination
Virtual Network identifier (2-4095,0=disabled)
Virtual Network priority (0-7)
F
IGURE
Configure the IP address by entering the “
Network.address(x)
Host IP address
Local network mask
Take the following into account:

The network settings (IP address, mask and Gateway) can be configured automatically
from a DHCP server. Select the relevant parameter if you want to do this.
option is selected, the
been configured will not apply.

The device allows you to configure two IP addresses.
Configuration Guide
Network configuration
The network is configured by first selecting the “ Network ” option (see Figure
Get network configuration from DHCP server ○ Yes ●No Whether the parameters are
assigned from a DHCP server
address(0)
address(1)
IP addresses of the device
0.0.0.0 Address of the router
0.0.0.0
Name resolution IP address
ConectaIP Domain name
23 Telnet server port
80 Web server port
53 DNS port
123 NTP port (time synchronisation)
Simple Network Management Protocol port 161 SNMP port
_________ SNMP trace sender address
162 SNMP trace destination port
4095,0=disabled) 0
VPN identifier
0 VPN priority
IGURE
26. C
ONFIGURATION OF NETWORK SETTINGS
IP address by entering the “ Local network addresses address(0)
192.168.22.41 IP address of the IPefono
255.255.0.0 Mask of the IPefono
F
IGURE
27. C
ONFIGURATION OF THE
IP
ADDRESS
Take the following into account:
The network settings (IP address, mask and Gateway) can be configured automatically
from a DHCP server. Select the relevant parameter if you want to do this.
option is selected, the IP address, router and name resolution (DNS) settings that have
been configured will not apply.
The device allows you to configure two IP addresses.
5 – Configuration
Configuration Guide. IPefono. V2.8
Figure 23 ). The settings
Whether the parameters are
assigned from a DHCP server
IP addresses of the device
Address of the router
Name resolution IP address
Telnet server port
Web server port
NTP port (time synchronisation)
sender address
destination port
Local network addresses address(0) ” parameter:
IP address of the IPefono
Mask of the IPefono
The network settings (IP address, mask and Gateway) can be configured automatically
from a DHCP server. Select the relevant parameter if you want to do this. When this
router and name resolution (DNS) settings that have