Mounting Instructions
ProfiDAT
®
Data Transmission System
Programm 0514
MAL0514-0005b-EN
www.conductix.com
translated document
page 6 of 82
1
General Notes
1.1
About this Document
This document facilitates safe and efficient working with the Conductix-Wampfler ProfiDAT
®
data-transmission system. The data-
transmission system consists of components integrated into a conductor rail system by the system engineer for the transmission of
data between a base unit and a mobile system component.
This document is a part of the data transmission system, and must be kept in its immediate vicinity and accessible to personnel at
all times. Personnel must read this document carefully and understand it before starting any work. Compliance with all safety and
handling instructions given in this document is a basic prerequisite for safe working.
Local accident-protection regulations and general safety guidelines for the area of use of the data-transmission system also apply.
Illustrations in this document are provided for basic understanding and may deviate from the actual versions of individual compo-
nents.
In addition to these instructions, the instructions in the appendices for the individual installed components also apply.
1.2
Limitation of Liability
All data and information in this mounting instructions have been compiled in compliance with the applicable standards and regula-
tions, best practice and our many years of experience and knowledge.
The manufacturer accepts no liability for damages resulting from:
Failure to comply with this document
Improper use
Use by untrained personnel
Unauthorized modifications
Technical changes
Use of unauthorized replacement parts and accessories
The actual scope of delivery may differ from the explanations and descriptions provided here if the model in question is a spe-
cial one, if additional equipped has been ordered or due to recent technical changes.
The obligations agreed upon in the delivery agreement and our General Terms and Conditions of business apply, as do the delivery
conditions of the manufacturer and the legal regulations applicable at the time the contract was concluded.
All products are subject to technical modifications in the context of improvement of function and further development.
