Mounting Instruction
Conductor rail system
MultiLine 0835
MAL0835-0001c-EN
www.conductix.com
translated document
page 26 of 81
Fig. 8: Example: Cable bundle with strain relief
Cable bundle with strain relief
The strain relief ensures that the cables do not pull on the sliding
contacts or current collectors, press against them or twist.
Use the QR code (“click“ or “scan“), to watch our animation
MultiLine 0835 System Overview
.
4.3
Accessories
The following accessories are included in the scope of delivery:
Fig. 9: Arrester 0835
Arrester 0835
The arrester is fitted to the very top end of the conductor rail and marks its
start. This is the point from which the system is built over its entire length.
The arrester must be tightly fastened (e.g. using a screw clamp)!
See section 6.2
Fig. 10: Installation block 0835
Installation block 0835
The installation block is a tool designed to enable the two conductor bars
to be evenly pushed onto the connectors.
See section 6.2
