Operating Instructions
Insulated Conductor Rail System
SinglePowerLine Program 0813
BAL0813-0007-EN
www.conductix.com
translated document
page 92 of 108
9
Maintenance and Service
9.1
Safety
Recommended protective equipment:
DANGER!
Risk of injury due to electrical shock!
→
Switch off the power supply to the
conductor rail system
according to the 5 Safety
Rules and secure it against switching on again. For the 5 Safety Rules, see Section
2.5.
DANGER!
Risk of death due to electrical shock!
Contact with components carrying electrical power can lead to death or severe injury due to
electrical shock. Danger of injury due to shock reactions, falling or being thrown across the room
due to electrical shock.
→
Disconnect all line feeds from the voltage supply.
→
Check whether a voltage is still present in the components and take measures where
necessary.
→
The customer must provide grounding for metallic components.
→
The customer must provide protective devices.
WARNING!
Risk of injury due to improperly executed maintenance and/or servicing tasks!
Improper or omitted maintenance or servicing work can result in serious injury to persons and/or
material damage. Loosely stacked components and tools that are left lying around are a source of
danger. They are a trip hazards and improperly stored components can fall over or fall to the ground.
→
The system must only be serviced and maintained by specialist personnel!
→
Before starting work, ensure that there is sufficient space for the installation.
→
Ensure the installation area is clean and tidy!
→
If components have been removed, be careful to reinstall them properly, replace all fastening
elements and comply with screw tightening torques.
