41
Operator Interface
Nortec GS
2583701_C_EN_1812_Nortec-GS_OM
Password Setting Tab
–
Setpoint Password:
allows you to enable or disable password
control to modify setpoint values when the humidifier is configured
to operate on internal RH(P) or RH(PI) control.
Options:
Yes
– requires password to modify setpoint values.
No
– requires no password to modify setpoint values.
Factory setting:
Yes
–
Main Menu Password:
allows you to enable or disable password
control to access the Main menu.
Options:
Yes
– requires password to access the Main menu.
No
– requires no password to access the Main menu.
Factory setting:
Yes
Software Updates Tab
–
Software Update:
allows you to update the control software. A
warning message is displayed asking you to confirm the software
updating.
CAUTION!
The control software will be corrupted if
updating is interrupted, which may render the humidifier
unusable.
Refer to
"Installing Software Updates" on page 66
for detailed
instructions.
–
Driver A/B Update:
allows you to update the driver board firmware
for steam cylinder A/B
Software Settings Tab
–
Load Contact Info Page:
allows you to automatically insert contact
information (for technical support) in the unit, from a USB memory
stick. This information is shown when selecting Help on the Home
Screen. Information includes Company Name, Address, Telephone
Number, Email, and Website. Please contact your Condair representa
-
tive for assistance with this.
–
Manually Load Contact Info:
allows you to manually enter the
Company Name, Address, Telephone Number, Email, and Website,
that will appear when the user selects Help from the Home Screen.
–
Load Logger Definition:
allows you to load a logger definition file
from a USB drive to save data (CSV file) on the USB while the unit
is functioning. A factory supplied access file is required to enable
operation. The interval between recordings can be changed from
the Engineering menu (see your Condair representative).
