Nortec AirFog Installation Manual |
5
Installation
Nozzle System Layout
If a drawing for the proposed system was not supplied, then it is recommended that one be
created prior to installing the system. With reference to the Nortec AirFog Engineering Manual,
review the site where the nozzle system is to be installed. The location of equipment, lights,
pillars and other structures should be drawn on the floor plans. The proper selection and
location of the nozzles is very dependent upon these obstructions. Figure 1: Typical Nozzle
Layout, can be used as a guide for identifying the various components used with a system.
The supply and feed lines for the system should be kept in straight unobstructed lines where
possible. Air and water distribution network pipes are to be installed level along walls, pillars or
hung from the ceiling. Avoid placing the lines over top of equipment and other areas, which will
make it difficult to gain access at a later date. If the lines have to be routed around an obstacle
such as a beam, always go under the obstacle, never over it.
Figure 1: Typical Nozzle Layout for Wall Mounted System