RCIM User’s Guide
2
-
8
The last two messages indicate transient errors such as cable parity errors or temporary
loss of cable synchronization. If a transient error occurs, it may require a link in the cable
to resynchronize. If a distributed interrupt is being broadcast on the cable, it may be lost.
Transient errors also affect the synchronization of the tick timers since the cable clock will
not reach all of the systems. Refer to Chapter 3 for instructions for synchronizing clocks.
RCIM III
1
Board Illustration
1
Figure 2-4 shows the RCIM III board with optional high stability OCXO (Oven
Controlled Crystal Oscillator) and GPS modules installed.
Figure 2-4 RCIM III Board
GPS Module
Connectors
Oven
Controlled
Crystal
Oscillator
Summary of Contents for RCIM
