ATTACHING / REMOVING THE 4TH WHEEL
Note: When preparing to play, we
recommend that you attach the
4th wheel as the last step in setting
up before use. When stowing the
buggy after use, we recommend you
remove the 4th wheel as the very
first step before removing all other
wheels and folding the buggy flat.
STEP 4
Ensure your bag is properly attached
to the buggy, then unfold the buggy
so the handle locks in place and
buggy legs are extended exposing
the Mounting Block.
Before attaching the 4th wheel, fit the
front and side wheels of the buggy.
Now take the 4th wheel and ensure
the lever is in the open position as
shown.
Postion the 4th wheel in place with
the Mounting Block ensuring the
lever faces upwards as shown (at the
top of the block).
It is important when doing this that
the edge (tooth) of the 4th wheel’s
mount slips underneath the edge of
the Mounting Block before the lever
is locked.
Once flush with the Mounting
Block and pushed upwards so the
leading edge of the mount is tucked
underneath, turn the fastening lever
to secure the 4th wheel in position.
You are now ready to play.
To remove the 4th wheel when it
is not required, first open the lever
to release the wheel from gripping
the mount. Before you pull at the
4th wheel, slide it down to release
the edge (tooth) from the Mounting
Block (see inset).
Once the 4th wheel is detached, you
can proceed with removing the side
and front wheels then stowing the
buggy flat.
If you require any assitance fitting
or removing your 4th wheel please
contact our customer service team
on 1300 650 059.
1300 650 059 | concoursegolf.com
Version 1.2
EDGE (TOOTH)
SLIDE UP TO LOCK
SLIDE DOWN TO UNLOCK
LOCKED
OPEN
