Page 10
INTRODUCTION PLAY - at CD stop mode and
CD play mode (for remote only)
This function allows the first 10 seconds of each
track of the disc to be played.
RANDOM PLAY - at CD play mode and CD
stop mode (for remote only)
All the tracks on the disc can be played in random
order.
MAINTENANCE
CLEANING THE UNIT
Do not use volatile chemicals on the unit. Clean by lightly wiping with a soft cloth.
IMPORTANT NOTICE:
•
Should the CD door be opened before the CD is completed, a jamming noise may occur. This can be
resolved by closing the CD door and then press the CD DOOR OPEN/CLOSE button temporarily.
•
If an abnormal display indication or an operating problem occurs, turn off power. Wait at least 5
seconds, then turn on power.
•
Before transporting the unit, remove the disc from the CD tray.
CLEAN CD
If the CD skips or will not play, the disc may need cleaning. Before playing, wipe the disc fromthe
centre out with a cleaning cloth. After playing, store the disc in its case.
RANDOM
Press the
INTRO
button.
INTRO appears in the display on the unit.
To cancel introduction play
Press the
■
STOP
or
INTRO
button so that
“INTRO” in the display disappears.
To cancel random play
Press the
■
STOP
or
RANDOM
button so that
“RANDOM” in the display disappears.
Press the
RANDOM
button.
RANDOM appears in the display on the unit.
1.
INTRO play can be performed during program play.
2.
INTRO play can be performed during random play.
3.
RANDOM play can be performed during intro play.
4.
RANDOM play can’t be performed during program play.
