Conceptronic CUPS650, Multi Language Quick Manual

Page: 3 / 64

English
3. Installation & usage

Inspection
Remove the UPS from its packaging and inspect it for damage that may have
occurred during shipping. If any damage is discovered, repack the unit and
return it to the place of purchase.

Charging
This unit is shipped from the factory with its internal battery fully charged,
however, some charge may be lost during shipping and the battery should be
recharged prior to use. Plug the unit into an appropriate power supply and
allow the UPS to charge fully by leaving it plugged in for at least 6 hours with
no load (no electrical devices such as computers, monitors, etc.) connected.

Placement
Install the UPS unit in any protected environment that provides adequate
airflow around the unit, and is free from excessive dust, corrosive fumes and
conductive contaminants. Do not operate your UPS in an environment where
the ambient temperature or humidity is high.