ENGLISH
10
4.
KVM Switching Explanation
4.1
Basic Switching Explanation
It is possible to switch between your computers in 2 different ways:
o
Use of the PC-1 & PC-2 selection switch (shown in chapter 2.1).
o
By use of the keyboard hotkey “
Scroll-lock
” + “
Scroll-lock
” + “
Arrow Up
” or “
Arrow
Down
”.
4.2
Advanced Switching Explanation
In the table below you will find the advanced switching features of the KVM Switch.
Command
Hotkey
Description
Select PC
ScrLk
+
ScrLk
+ (
x
)
Select a PC Channel
(
x
can be
1
or
2
)
Select Higher PC
ScrLk
+
ScrLk
+ [
Arrow Up
]
Select the Higher PC Channel
Select Lower PC
ScrLk
+
ScrLk
+ [
Arrow Dwn
]
Select the Lower PC Channel
Bind PC + Audio Channel
ScrLk
+
ScrLk
+ [
Q
]
Bind the PC and Audio Channel
(Default
Setting)
Unbind PC + Audio Channel
ScrLk
+
ScrLk
+ [
W
]
Unbind the PC and Audio Channel
Select Audio Channel
ScrLk
+
ScrLk
+ [
F
x
]
Select an Audio Channel
(if Audio is not binded to PC Channel)
Start Autoscan
ScrLk
+
ScrLk
+ [
S
]
Start Auto scanning all Channels
(scan delay = 5 seconds)
Stop Autoscan
[
Press any Key
]
Terminate Autoscan Function
Enjoy the use of your Conceptronic 2-Ports PS/2-KVM Switch !