38
39
EN
EN
VP6110
VP6110
DISPLAY DESCRIPTION
Filter status indicator - If the indicator light comes on, the filters must
be cleaned or replaced.
Dirt indicator light - The indicator light comes on when the appliance
detects a large amount of dirt.
Battery indication - The indicator light indicates the battery
status.
MIN
For a small amount of dirt.
AUTO Automatically adjusts the suction power according to the amount of
dirt. If it detects a large amount of dirt, it switches to the MAX mode, if
it detects a small amount of dirt, it sets the suction power to MIN.
MAX
Maximum power for a large amount of dirt.
OPERATING INSTRUCTIONS
Vacuum cleaner assembly
Always disconnect the plug out of the electrical outlet before assembling or removing accessories!
1. Insert the suction tube into the hand-held unit of the vacuum cleaner, you will hear a click. To remove the tube from
the hand-held unit, press the lock button and pull to disconnect.
2. Insert the turbo brush into the suction tube, you will hear a click. To remove the turbo brush from the extension
tube, press the lock button and pull to disconnect. The turbo brush can be connected to the hand-held unit in the
same way.
BATTERY INSTALLATION
Insert the battery into the body of the hand-held unit and install it to prevent it from
coming loose. The battery is placed correctly when you heard a sound. To release
the battery, press the release buttons and pull to disconnect.
Note
: To prolong the battery life, always charge the battery when the battery is nearly
empty. Do not store or recharge the appliance in environment with temperatures below
0 °C or higher than 40 °C. These temperatures may damage the appliance. During
the charging process, the temperature of the appliance may increase, this is normal.
If you do not use the vacuum cleaner for more than 3 months, allow it to charge for
12 hours. Then place the vacuum cleaner in a dry and cool place.
USE
Before installing the battery, check if it is fully charged.
1. Press the ON/OFF button to switch on the appliance.
2. You can use the power regulator to change the appliance mode to MIN, AUTO, MAX.
3. Press the ON/OFF button again to switch off the vacuum cleaner.
Note
: We recommend using the maximum power of the hand-held unit in the case of a heavily soiled area or on carpets
with medium or high pile.
ACCESSORIES
Select the accessories according to the nature of the surface to be cleaned.
Mini turbo brush
- suitable for bed linen, fabric, sofas, etc.
Slot nozzle
– suitable for wall corners, car cushioning, radiators, etc.
Slot nozzle with brush
- suitable for bed linen, fabric, sofas, etc.
EMPTYING THE DUST CONTAINER
To empty the dust container, press the emptying button. Open the container, empty the dust and close the container
cover.
REMOVING THE DUST CONTAINER
Press the buttons to release the dust container and move down and away from the appliance to remove the dust
container.
REMOVING THE FILTER
Remove the filters from the dust container upwards. Turn the coarse filter to the left and the HEPA filter to the right to
separate the filters. The filters can be rinsed in water. Allow the filters to dry before placing back into the dust container.
REMOVING THE BRUSH
There is a brush release button on the side of the turbo brush, slide the button to release the brush, then the brush can
be removed
