Concept2 OPV3150, Manual

Page: 64 / 70

64
EN
OPV3150
19
5
Fig. 6
correct incorrect
Fig. 4 Fig. 5
When installing the appliance, follow these steps:
1. Remove all the packaging and marketing materials before
first use.
2. Mark the required installation height (650 mm for electric
and 750 mm for gas cooking plates) on the wall behind the
cooker or the cooking plate (Fig. 3).
3. Draw a vertical line to mark the centre of the cooking plate
(of the cooker).
4. Drill the holes and attach the hood to the top cabinet
according to Fig. 4, or to the wall according to Fig. 5.
5. Make sure that the hood is in the horizontal position in
order to prevent grease (fat) from accumulating on one
side of the appliance (Fig. 6).
6. After the hood has been hung, install the flexible outlet
duct to the outlet opening (Fig. 7). Use a reducer fitting
150/120 mm in diameter, if required. Insert the second
part of the flexible duct in the opening prepared in the
wall.
7. Plug the power cord into the wall outlet.
Fig. 3