83
MNV3960
EN
Door lifting spring strength adjustment
Due to the material used for the cover plate,
the weight will differ accordingly. You may
set the spring strength using screws (Fig. 20)
on the front side so that the door holds in
the open position, and close smoothly when
lifted.
Connection of the discharge hose
Connect the discharge hose:
a) to a discharge pipe with a diameter of 40 mm with a hole,
b) or use the supplied adapter that enables discharge into a basin or a bathtub. Note: If you use the adapter, it must
be fixed properly. Otherwise, it can come loose and the water can spill on the floor.
c) Or use the siphon side hose of the sink or basin. Fix the hose to the lower side of the worktop. Thus, you will
prevent the water from flowing back into the dishwasher.
The end of the discharge hose should be 400 – 1,000 mm (Fig. 21) above the floor, not immersed in water to
prevent back flow.
Make sure the hose is not bent or jammed to prevent a reduced or stopped water supply.
Fig. 21
Fig. 20
Mount the adapter on bottom
Adapter for hanging the drain hose
Drain hose
Worktop
Dishwasher door
