Concept2 MNV2460, Manual

Page: 91 / 120

Cleaning the control panel and surface of the dishwasher
Use a soft, wet cloth. Do not use rough or sharp objects or aggressive detergents.
Protect the door lock from water.
Protection from freezing
If you are not going to use the dishwasher for longer time, or you are going to store it in a place with a low tempera-
ture, you should proceed as follows:
1. Disconnect the dishwasher from the power outlet.
2. Disconnect the dishwasher from the water supply.
3. Dismantle the supply hose and pour out the water. You may use a shallow tray to collect the water.
4. Connect the supply hose back to the dishwasher.
5. Remove the fi lter system on the bottom, and dry the remaining water (with a sponge).
Some tips for maintenance
• Close the water supply after each use, and leave the door slightly open to prevent dampness and smell from ac-
cumulating inside.
• Disconnect the power cable from the wall outlet before cleaning and maintenance.
• Do not use rough tools or hand-washing sponges. They could scratch the surface. Use a wet cloth soaked in water
with detergent.
• If you are leaving your apartment for a longer period of time, run a washing program with the dishwasher empty;
after completion disconnect the power supply cable, close the water tap and leave the door slightly open to prevent
dampness and smell from accumulating inside. An open door also prolongs the life of the sealing.
• If you need to move the unit, keep it in the vertical position. If this is impossible, turn and move it on the back side.
• One of the sources of smell is dirt around individual seals. Check them and wipe with a wet cloth if necessary.
89 MNV2460
EN